Lincoln Home

Lincoln Home, Springfield - 6 sheets

Skill level for model-building: MODERATE

Abraham and Mary Lincoln’s sons Edward, William, and Thomas (“Tad”) were born in the house on Eighth Street in Springfield. Sadly Edward also died while the family lived there. The Lincoln’s oldest son Robert, while born at the Globe, also grew up in this house. The 1858 Senate race and associated debates brought Lincoln national prominence and helped win him the 1860 Republican presidential nomination. After winning the election, the Lincolns left this home on February 11, 1861, for Washington DC. Lincoln never returned to his home. Today it is a fully restored National Historic Site owned and managed by the U.S. National Park Service and is open daily to the public for guided tours.

Click to learn more about Lincoln Home

Back to List of all models

Tips for construction of cardstock models:

  1. Print the model pages out in color onto cardstock. Normal weight paper will be too flimsy. Larger, more challenging buildings can take many sheets of cardstock. For example, the Gardner Museum takes 10 sheets; Old Main requires 17; while the Old State Capitol requires a substantial 41 sheets (not for the faint-hearted). Smaller less complex buildings are better for first-time or younger builders. The Thomas Lincoln home and the Berry-Lincoln Store each only require 2 sheets; most of the Main Street buildings take 5 sheets or less of cardstock.
  2. Although not required, you may wish to print out a second copy (plain paper is fine) as a reference guide. Once you start cutting out your cardstock model pieces you may find it helpful to be able to read all of the notes and arrows on a second, uncut, plain-paper copy.
  3. Use sharp scissors or a slim, handled, craft-knife when cutting. A metal straight-edge will assist when you cut.
  4. Although standard white “school” glues will work, some similar “craft” opaque white glues dry more quickly and with less warping. Clear plastic-model glues, rubber cement, or glue sticks don’t work as well.
  5. When gluing, lightly glue the tabs only, not the receiving surface. Be careful not to use too much glue or the paper may warp or pucker.
  6. Let the model dry after gluing each piece before attempting the next. You may find that you want to space construction out over more than one day.
  7. To make the crispest edges, lightly score along the inside of fold lines before folding.
  8. Glue the roof on last.
  9. Enjoy Building Your Own Illinois historic building and check back again for additional buildings.