Lincoln Tomb

Lincoln Tomb, Springfield - 17 sheets

Skill level for model-building: Advanced

The interior of the Lincoln Tomb is finished in a highly polished marble and trimmed with bronze. The south entrance opens into a rotunda, where two corridors lead into the burial chamber. The rotundaThis photo shows the Interior palladium-leafed rotunda and the replica of Daniel Chester French’s Washington DC Lincoln Memorial statue (photo: William Asher). and corridors contain reduced-scale reproductions of important Lincoln statues as well as plaques with excerpts from Lincoln’s Springfield farewell speech, the Gettysburg Address, and his Second Inaugural Address. Lincoln’s remains rest in a concrete vault ten feet below the marble floor of the burial chamber. A massive granite cenotaph marking the gravesite is flanked by the Presidential flag and flags of the states in which the Lincoln family resided. Crypts in the chamber’s south wall hold the remains of Lincoln’s wife and three of their sons. The Lincoln Tomb is a State of Illinois Historic Site and operated by the Illinois Historic Preservation Agency.

Click to learn more about Lincoln Tomb

Back to List of all models

Tips for construction of cardstock models:

  1. Print the model pages out in color onto cardstock. Normal weight paper will be too flimsy. Larger, more challenging buildings can take many sheets of cardstock. For example, the Gardner Museum takes 10 sheets; Old Main requires 17; while the Old State Capitol requires a substantial 41 sheets (not for the faint-hearted). Smaller less complex buildings are better for first-time or younger builders. The Thomas Lincoln home and the Berry-Lincoln Store each only require 2 sheets; most of the Main Street buildings take 5 sheets or less of cardstock.
  2. Although not required, you may wish to print out a second copy (plain paper is fine) as a reference guide. Once you start cutting out your cardstock model pieces you may find it helpful to be able to read all of the notes and arrows on a second, uncut, plain-paper copy.
  3. Use sharp scissors or a slim, handled, craft-knife when cutting. A metal straight-edge will assist when you cut.
  4. Although standard white “school” glues will work, some similar “craft” opaque white glues dry more quickly and with less warping. Clear plastic-model glues, rubber cement, or glue sticks don’t work as well.
  5. When gluing, lightly glue the tabs only, not the receiving surface. Be careful not to use too much glue or the paper may warp or pucker.
  6. Let the model dry after gluing each piece before attempting the next. You may find that you want to space construction out over more than one day.
  7. To make the crispest edges, lightly score along the inside of fold lines before folding.
  8. Glue the roof on last.
  9. Enjoy Building Your Own Illinois historic building and check back again for additional buildings.